It’s possible to get so wrapped up in what you’re doing that you don’t hear your phone ringing or someone knocking on the door? This is where a chiming system comes in handy, as it lets you know whenever there’s a visitor or if there’s an emergency. Therefore, if your home is covered by SimpliSafe sensors, you may want to know if the keypad chimes.
SimpliSafe keypads chime with very low beeps when triggered. The company clarifies that the keypads chimes with a low sound since they use weaker speakers than the base station. Therefore, some users may have challenges hearing the chiming SimpliSafe keypad.
In the rest of this article, I’ll discuss some aspects concerning the functioning of SimpliSafe keypads, including lighting. Keep reading!
Reasons Why SimpliSafe Keypads Chime
It’s a no-brainer that SimpliSafe chiming in the base station notifies homeowners of an event. However, there are different events that can cause your SimpliSafe keypad to chime. Here are some of them:
When a Sensor Is Triggered
Your smart home’s SimpliSafe system covers an extensive area with sensors, cameras, and alarms. Thus, a sensor can get triggered without your knowledge due to such a comprehensive cover.
In most cases, SimpliSafe sensors are triggered when:
- A family member or a pet has entered the house
- A window or door is opened
- There’s an unusual movement in the home
When any of these events occur, your SimpliSafe keypad will chime with a low beep to notify you. If you’re not within earshot of the keypad, you can still know that a sensor has been triggered by checking the LED lights.
I’ll discuss the LED lights in the next section. For now, let’s take a look at another reason that can cause your SimpliSafe keypad to chime.
When the Battery Is Low
All electronics require batteries to function, and home security systems are no different. The company has included a battery backup in every security system to ensure that your SimpliSafe system is always up and running.
The battery backup kicks in whenever there’s a power outage to keep your home safe and secure. However, the backup batteries don’t last forever. Therefore, when they’re running low, your SimpliSafe keypad will chime.
The SimpliSafe keypad normally chimes five times after PIN entry to signify that the battery needs replacing.
When the System Is Disarmed or Armed
Arming and disarming a SimpliSafe home security system are two confusing terms. An armed SimpliSafe system triggers an alarm when various intrusion zones are breached. On the other hand, a disarmed system does not trigger an alarm, even when intrusion zones are breached.
You can arm and disarm your SimpliSafe home security system using the keypad or the mobile app. Whenever you arm or disarm the system, your keypad will chime once to let you know that the system is now in the selected mode.
It’s also worth noting that you can set your SimpliSafe security system to auto-arm and auto-disarm mode. In such a case, your keypad will chime whenever the system arms or disarms itself.
The Home Mode is the best mode for your SimpliSafe system if you want most of your systems armed. This mode arms all your home sensors apart from motion sensors.
You Forgot To Input the PIN in Home Mode
SimpliSafe home security PINs play a critical role by letting you know people’s movements within your home. The home security system is designed to trigger an alarm whenever an intruder tries to bypass the PIN.
If you forget to input your SimpliSafe PIN after arming the Home Mode, your keypad will chime continuously until you enter the correct PIN. The good thing is that you have up to five times to input the correct PIN before the monitoring center calls to inquire about the issue.
Reasons Why SimpliSafe Keypads Light Up
Your SimpliSafe keypad may keep lighting up from time to time. Such a situation can be worrying since you’re concerned about its battery’s life. The following are the reasons your keypad may keep lighting up from time to time:
Proximity Sensor
SimpliSafe keypads have proximity sensors that detect when someone is within range. Whenever someone comes close to the keypad, it lights up to show them the available options. The good thing is that the light goes off automatically after a few seconds of inactivity due to the keypad’s power-saving option.
The proximity sensor uses infrared lights to search for heat sources within the room. These lights activate the keypad’s backlight when they hit a warm object. This is how the keypad lights up.
Automatic Software Update
Your SimpliSafe keypad may also keep lighting up if it’s undergoing a software update. Such updates are usually downloaded automatically whenever your keypad is connected to the Internet.
You can tell that your keypad is updating by looking at the light’s color. An amber screen light signifies that the keypad is downloading or installing an update. You don’t have to do anything during this process. The update will take place automatically, and once done, the keypad will restart, turning the backlight white.
Why Does My SimpliSafe Alarm Beep?
Your SimpliSafe alarm beeps due to low batteries. In most cases, the Simplisafe Original Extra siren beeps ten times after arming or disarming the system. This is a confirmation that the batteries are low and should be replaced.
Here is the procedure to replace the battery:
- Use a screwdriver to open the back part.
- Get four AA alkaline 1.5-volt batteries.
- Replace the old batteries with the new ones.
- Put back the case and screw it tightly.
The Duracell Coppertop AA Batteries (available from Walmart) are an excellent option for your replacement needs. These batteries have a long-lasting power that will serve you longer.
You should resync the system after replacing the battery. Here is the procedure for this:
- Hold down the programming button.
- Input the Master PIN on the keypad repeatedly while still holding the programming button.
- You should hear a beep after entering the Master PIN approximately five times. The beep indicates that the synchronization is complete.
After replacing the batteries, your SimpliSafe should stop beeping. If it doesn’t, you can try to reset it using a paperclip by pushing and holding the button for 15 seconds.
Final Thoughts
SimpliSafe keypad chime is a great way to know the status of your home security system. The keypad also lights up to keep you aware of its battery condition. In this way, you can rest assured your home is 24/7 secure.
